Pre-Assembled Ready for your radio gear and engine!
Pictures show components that are not included in the kit. Please see the owner's manual for a complete listing of included parts and items.
For the MP9 TKI4 SPECA the Final check is conducted individually by former world champion and Inferno developer Yuichi Kanai!
Semi-assembled kit can be ready same day for the big race!
Fine-tuned for continuous improvement by Yuichi Kanai, the new ‘Spec A’ version of the Inferno MP9 TKI4 is packaged as a semi-assembled chassis kit. Taking the previous TKI3 model’s reputation for speed to an extreme level, the new TKI4 features revised front/rear suspension that delivers improved cornering stability for sharper control. Recent demand for precision setting for aerodynamic performance is met with a newly designed body and rear wing that realizes both advanced cornering stability and traction. A thorough revision of all key components focused on delivering an edge in the heat of racing battle through superior maintenance, durability and reliability. In addition, the ‘Spec A’ version is semi-assembled with complex components such as Big Bore Shocks and ball differential pre-built using the special knowledge of skilled staff. Before shipping, Yuichi Kanai completes a final check of each model to ensure it meets the standard required for immediate racing success. Here is a model that is designed not only for advanced racers, but for anyone who wants to challenge 1/8 GP buggy racing at the highest level.
- Installation of R/C system such as receiver and servos and connection of linkage
- Painting of body and attachment of decals
(Body is pre-cut but requires opening of sections to suit your choice of engine head and exhaust).
- Tires and inners are required to be purchased separately and glued to wheels.
- Installation of engine, clutch, manifold and muffler. Assembly and installation of piping, linkages and air cleaner.
- Wing assembly and installation.
The Kyosho Inferno MP9e TKI4:
Enjoy the thrill of pure buggy racing with the increased speed and performance of the 1/8 scale electric Inferno MP9 TKI4! With its formidable controlled speed, the electric powered MP9e TKI4 inherits the INFERNO's controllability, superior airborne posture and great agility through optimal mass concentration and lower center of gravity. Shared components from the new MP9 TKI4 design such as longer front suspension arms, front suspension holder, front shock stay, rear wing and wing stay combine for increased stability on low to high grip surfaces. This design update not only delivers improved running performance but also the essential elements for racing victory in the form of a complete revision for improved maintenance efficiency and higher durability. Designed and built with a sole focus on racing to win, the pure racing specifications of the MP9e TKI4 will put you on the road to glory
The Inferno MP9e TKI is made in Tokyo Japan.
Required for Operation:
2ch 1 servo R/C system
2 batteries for chassis
Silicone oil for shocks
Paint for coloring body
Features:4WD with 3-diff shaft drive and 4-wheel independent suspension, low CGAluminum knuckles optimize ackermann for smoother corneringThicker ball end on the steering tie rod increases durabilityRevised mounting pin for the shock arm improves durability
Specifications:Length: 490mmWidth: 307mmHeight: 180mmWheelbase: 325mm (Wheelbase can be adjusted by changing the rear hub collars.)Gear Ratio: 12.7:1Weight: 3,370g approx.
With all the information covered here, it should be quite obvious that the new Kyosho Inferno MP9e TKI is the most advanced State of the Art 1/8th brushless ready buggy today, and has the heritage and capability to take you to the highest level of competition!