The 32811PW-B Kyosho Mini-Z MR-03 Lamborghini Murcielago LP670-4 SV Pearl White
The Kyosho Mini-Z is more
than just an small RC car, it is a legendary story of innovation and
evolution. Incredibly detailed, the Mini-Z with scale body, riding on
an amazing chassis, brings electronics, engineering and
performance to a level that is almost unbelievable!
The Kyosho Mini-Z can be operated by
beginners and experts alike. This is a great introduction to racing
and the RC world, as well as a fantastic pursuit for an expert level
racer looking for the next race win! The Mini-Z feels incredible as you
drive and with a huge number of upgrades and performance
enhancements the experience can become even more intense! Don’t
let the small size fool you!
This model and body uses the Rear Mounted motor
In more Depth:
The MR-03 chassis heralds a new era in the
world of the Mini-Z Racer. The objective first, was to develop a
chassis that could provide better handling dynamics than the older
MR-02 chassis and this peak performance chassis doesn't
disappoint. It blows its predecessor away! Second, the chassis
needed to be versatile so, that all the previous MR-015 and MR-02
series bodies would fit. This allows almost all of the bodies from all
previous Mini Z racers to fit with ease.
The MR-03 chassis is uncompromisingly
designed for racing performance. It is considerably narrower than the
MR-02's predecessor and has a much lower center of gravity. This
results in significantly higher cornering speeds and very agile
handling. The newly developed chassis front wheel alignment gives
the maximum mechanical grip and perfect traction in all driving
The Mini-Z MR-03-Racers are
equipped with the latest 2.4 GHz wireless technology. When you
turn on the transmitter the entire frequency band is automatically
scanned and selects a free channel. This eliminates the need to
organize finding frequencies for drivers. A total of up to 40 models
can be operated simultaneously with this new system and there are
no crystals! The frequencies are generated by a PLL
Along with the new 2.4GHz
radio technology, all the electronics have been revised for the MR-
03. The new processor runs faster and in conjunction with the Hi-
Speed FETs gives the MR-03 ultra fast response to user inputs. The
MR-03-Racer does not include the 2.4 GHz transmitter. The Kyosho
Perfex KT-18 transmitter No. KYO82001 is
not included with the MR-03 sets and must be purchased
Some of the new hi-tech
features are included in the new electronics in the MR-03. The RA-22
2.4 GHz receiver control unit can use the optional DNW-107 piezo
gyro to increase the stability of the car. The piezo-gyro detects
movement of the vehicle about its vertical axis (skidding), long before
they are visible to the human eye and controls it within a split
In the front of the car sits a high
-resolution digital servo, which receives the steering commands and
translates them in a split second to the wheels. The new servo has a
coreless servo motor which is durable and fast. The gear ratio in the
servo is 94.41:1.
The front wheels are
independently fitted with spring-mounted, double wishbone
suspension. The high-grip, low profile tires give the MR-03-Racer
uncompromising traction. In conjunction with the extremely low
center of gravity a breathtaking driving dynamic is achieved which,
on models of this size has never been realized before. These
precision designed cars drive and handle more like their much larger
The control board of MR-
03-Racer comes equipped with an ICS interface. With a special USB
cable and software, purchased separately (KYO82080), the chassis setup can be programmed
by your computer. The setup data of the vehicle can be conveniently
stored on your hard drive.
The rear axle
of the MR-03 chassis is based on proven MR-02 components.
Through the spring loaded Powerpod, the chassis is very flexible and
adapts to any road situation perfectly. The batteries are mounted so
that the center of gravity is very low for improved handling.
The Unbelievable paint
finish is actually hand polished!
One of the special features of the MR-03 is the
amazing pre-finished body. After assembly
and final quality control, the models are hand polished and brought
to a perfect shine. The detail and finish is "Show quality" and
deserves a place on display under glass. However, if you decide to
run yours in the sun light, the MR-03-racer looks like a precious
- VCS (Variable Camber Suspension)
– The upper control arms are
connected to king-pins and knuckles with ball links and allow the
camber angle to change with suspension stroke, just like a real car.
Tire contact with the surface remains constant, even during chassis
roll and suspension stroke from surface tracing. The newly
developed digital steering servo uses a coreless motor that delivers
quick steering response and sharp maneuverability that feels like its
riding on rails. Also, the upper arm and one-piece cantilever provide
ideal cushioned movement for the coil spring. In addition, the
stainless steel king pin and wheel shaft deliver smooth movement for
excellent running stability. Precision geometry settings eliminate toe
in and toe out change during suspension stroke and produce a
neutral steering feel. The innovative VCS (Variable Camber
Suspension) represents a significant evolutionary step in the history
of the MINI-Z.
- Digital Steering Servo -
The powerful position retention and movement of the digital servo is
enhanced with the adoption of a coreless motor that provides
instantaneous pick up and stopping. In addition, the newly
developed steering gear unit has 3 times the gear ratio of previous
versions for greater power in holding it's position so it keeps it's line
firmly in the face of kickbacks from the road surface and also delivers
even more precise movement and response.
- Battery Layout - Same
battery layout as the MR-02 chassis achieving a low center of gravity
with a main chassis width equal to the narrow MR-015.
- Compatible With All ASC Bodies - The main chassis is compatible with all MINI-Z ASC,
AutoScale bodies, ranging from MR-015, MR-02 and AWD. Pick and
choose from any body in the Mini Z AutoScale body series; there are
100's of bodies to choose from. *Special motor case and differential
gear assembly is required to fit some body styles.
- RA-22 2.4GHz RX TX Technology - Equipped with the new next generation RA-22 2.4GHz RC
unit specially designed for the MR-03. Requires no frequency bands.
Simply switch power ON and enjoy safe and stable control. SF
2.4GHz system automatically scans for open frequencies and
promises safer and more secure control.
- Coreless Motor + New Gear
Reduction Ratio - Digital steering
servo features a coreless motor and a gear unit that has 3 times the
gear reduction ratio of previous units for powerful movement and
- Adjustable Front Tread
- Can be set to either narrow or
wide tread by replacing the front lower and upper plates and
steering tie rod. Of course the wheelbase can still be adjusted to suit
certain car types.
- Endless Adjustments - Coil springs in the front suspension can be easily
replaced by removing the spring stopper with just two screws. Motor
mount can be easily removed and replaced to suit whatever chassis
configuration you want to run from a MM, RM, HM or LM type of
- Powerful Performance -
FET speed control amp with more than double the capacity of
previous version produces extra powerful running performance.
- KT-18 2.4GHz Transmitter
- Newly developed 2.4GHz R/C system requires no frequency
crystals and automatically scans for open frequencies, allowing up to
40 cars to be run together. Simply switch the power on for stable
control without interference. The fastest signal processing in the
history of R/C results in almost instantaneous reaction to the driver's
will for a more direct control feel. By pairing the transmitter to the
chassis, a single transmitter can be registered and used with
multiple 2.4GHz MINI-Z models. To match the latest R/C technology,
a new generation LM chassis has been developed for even greater
performance. *Transmitter Sold Separately Item KYO82001
- Expansion Connectors -
The expansion connector allows optional gyro, light unit and I.C.S.
interface to be connected and used.
Power Train - Rear power train utilizes the previous models design,
the MR-03 rear drive train is fully compatible with all the optional
parts currently available for the MR-02.
What is ARR Chassis Set?
- An ARR Chassis Set is a semi-
assembled chassis model that includes nearly everything you need
to run. A Pre-painted body is included, so only consumables like
batteries and a KT-18 transmitter #82001 are required so you can
start operating the model without delay.
- Semi-assembled chassis
and Finished Body
- MM specification power unit (installed)
- RM specification motor case
- Lower and upper plate for wide tread (front), steering tie rod
- Lower and upper plate for narrow tread (front), steering tie
- Front suspension spacer for adjustment
- 6T. 7T. 8T. 9T Pinion Gear
- Pinion removing tools
- Pairing stick
- Spare wheel nut