(Your shopping cart is empty)

Join our mailing list! 

  Home > Radios and Accessories > Radios > Airtronics >

Airtronics RX451R M11X SSR FHSS-3 Receiver (for SSR Sx)

AIR92451 Airtronics RX451R M11X SSR FHSS-3 Receiver (for SSR Sx)
AIR92451 Airtronics RX451R M11X SSR FHSS-3 Receiver (for SSR Sx)

List Price (US Dollars): $179.99
Our Price (US Dollars): $118.99

Quantity in Stock:(Out of Stock)
Availability: Discontinued - See Product Description
Product Code: AIR92451

The 92451 4-Channel 2.4GHz FHSS-3 Super Response Surface Receiver is designed for use with the Airtronics M11X and MX-3X, although it can also be used with the Airtronics MT-4. This receiver features an extremely low latency time and high frame rate, which makes you feel more connected to your model than ever. This receiver works equally well in cars, trucks and boats.

*This receiver is designed for use with Airtronics SRG series Digital servos. When used with Airtronics SRG Digital servos, you can use the SHR setting for the fastest response time. The combination of using Digital servos and using the correct Servo Mode setting results in the ultimate feel and response, making you feel more in control of your model than ever.

*This receiver is compatible with Airtronics 2.4GHz FHSS-3 capable surface transmitters.

*All Airtronics 2.4GHz FHSS-3 surface receivers now have a Nominal Input Voltage rating of 4.8v ~ 7.4v.

Features and Specifications:

One-Touch Binding

Single Receiver Antenna

Compatible will Airtronics 2.4GHz FHSS-3 Capable Surface Transmitters

High Frame Rate, Low Latency FHSS-3 Technology

Servo Mode Selectable

Nominal Input Voltage Up to 7.4v Allows Use of 7.4 Volt Servos

Frequency/Modulation Type: 2.4GHz/FHSS-3

Nominal Input Voltage: 4.8v ~ 7.4v

Weight: 0.30oz (8.5gr)

Dimensions: 1.43 x 0.94 x 0.59in (36.5 x 24.0 x 15.0mm)

Fail Safe: Yes (Programmable on All Channels)

Receiver Battery Fail Safe: Yes (3.8v Default / 3.5v ~ 5.0v Adjustable)

Connector Type: Universal 'Z'

*This receiver has a Nominal Input Voltage rating of 4.8v ~ 7.4v, therefore, it can be powered using a 4 Cell to 6 Cell Ni-Cd or Ni-MH battery pack, or a 2S Li-Po or 2S A123/Li-Fe battery pack. DO NOT USE A 3S Li-Po BATTERY PACK!

*When using a 2S Li-Po battery pack you should NOT use servos rated for 4.8 or 6.0 volts, otherwise damage to your servos could occur. In this case, use high voltage 7.4 volt servos.

*Do NOT use Analog servos with this receiver. Use ONLY digital servos. If you use analog servos, the servos and/or receiver could be damaged. In addition, some older ESCs may not support the extremely high frame rate of this receiver.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Radios and Accessories > Radios > Airtronics
Radios and Accessories > Radios