Charge 4 Different battery packs at once!
Run from AC or DC power source!
The Hitec x4-80 Charger has 4 separate built in computer
controlled chargers so you can charge any combination of cells, battery types
and capacities all at the same time. It also has a built in 22 watt power supply! Convenience has never been so high with a
charger! Just imagine all the times you could have used this setup! All this for
a fraction of the cost 4 separate chargers of this capacity would cost.
This compact charger with
battery management and integral balancer is simple to use and utterly reliable.
It features four identical and independent 50-watt power outputs, for a total
output power of 200 watts. Each output can handle up to 15 NiCd/NiMH cells, or a
6S Lithium pack simultaneously. Four individual balancing ports eliminate the
need for a separate balancer when charging Lithium batteries. Equipped with a
twin fan cooling system which has an internal sensor for controlling fan speed,
our charger is both efficient and safe. Charge your batteries and take charge of
The Hitec X4 charger offers a
complete charging solution for novice and expert RC enthusiasts alike. The
multi-tasking versatility of this new charger makes it a perfect fit for nitro
regardless of what you drive, hover, float or fly.
LiPo, LiFe, Li-ION, NiCD, NiMH, Pb
Number of Cells:
1 - 6 Cells
1 - 15 Cells
2 - 20V
0.1 - 6.0A (up to 50W [total units 200W])
0.1 - 1.0A (up to 5W [total units 20W])
Multiplex, Thunder Power, Flight Power compatible
Power supply: Built in 22 Amp DC power supply to accommodate plugging into an AC Power source.
225.4 x 158.6 x 62.4mm
DC 11 - 15V
DC 14V - 25A